When was the last time the roof of your building was inspected? If it has been awhile, the roof may have problems lurking that need immediate attention. Some roof problems cause obvious signs such as leaks, while some produce subtle signs which are only detectable at first glance. In either case, leaving the problems unaddressed can cost you thousands once you finally repair them. If the roof on your building has any of the problems listed below, a company that specializes in commercial roofing should repair them quickly:

Buckled Panels

Roof panels buckle because of weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow underneath the panels, making them loose. As the problem worsens, the panels begin to fall off, often coming off in large sections whenever a storm hits. Buckled panels are probably one of the most commonly fixed problems by companies that perform roof repair.

Expended Screw Holes

Expanded screw holes are another problem for panel roofs. As time passes, wind and fluctuating temperatures cause the screw holes in panels to widen round the screws that hold the panels set up. This creates a space where water can leak within the panels and soak the roof deck. After the deck becomes saturated, the thing is costly to fix.

Blistering

Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose a problem, large ones can rupture and allow water to seep beneath the bitumen. Once the blisters form, hot weather typically makes them worse. As a result of humid subtropical climate in some regions of the country, commercial roofing frequently experiences blistering.

Ponding Water

Blocked drains and improper sloping could cause water to gather in small ponds on a roof. Repairing a blocked drain is simple, but fixing a sloping problem is more complex. Often, installing a taper insulation system to establish a new slope is the greatest solution. During the rainy season, resolving ponding water is among the most common types of roof repair.

Loose Flashing

Flashing prevents water from seeping in the crevice where the roof abuts to protrusions such as chimneys and vents. Over time, most flashing must be resealed. If it is not, leaks may cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.

Missing Mortar

Chimneys and high parts of brick walls that have parts of missing mortar could cause leaks. These leaks are often mistaken for leaks in the roof membrane, but an intensive inspection by way of a company that focuses on commercial roofing will reveal the true problem. Most parts of missing mortar could be repaired with basic tuck pointing procedures.

Roofing Company Baton Rouge Conclusion

The problems above are a few of the most common known reasons for roof repair. When they are corrected early, most problems are inexpensive to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the better way to ensure problems are detected early.